DOW FROTH PAK - 210 (1.75 PCF) (A&B ,10 NOZZLES, GUN & HOSE) *NON-RETURNABLE ITE
Froth-Pak is a professional-use, two component polyurethane spray foam that comes in both portable kits and refillable tanks.
For filling cavities, penetrations, cracks and expansion joints, amongst several other applications, the chemically-cured Dow Froth Pak foam has significant advantages, including a reduced curing time and a shorter wait for the foam to become tack-free. When you've run out of this great product, refillable cylinders are available.
Theoretical Yield (Board Feet)= 200 Board Feet (0.46 m3)
- Simple application, no complicated procedures, professional results
- Dispenses, expands and becomes tack free in seconds
- Cures in 1 minute
Froth-Pak 200 is typically used as a foam insulating sealant to fill cavities, wall and floor penetrations, and is also commonly used to repair spray-applied polyurethane applications. Froth-Pak can be used in either interior or exterior industrial, commercial, institutional and residential settings. If used in an exterior setting, a coating must be applied for UV protection.
|DOW FROTH-PAK TECHNICAL DATA:|
|Basis||-||Two component polyurethane foam|
|UL Classifi ed (Class 1)||MSHA||25/350|
|Percent Closed Cell Content||ASTM D-2856||92|
|Thermal Resistance ("R" Value)||ASTM C-518||6.99/in|
|Open Time||N/A||15 sec|
|Compressive Strength||ASTM D-1621||22 psi|
|Tensile Strength||ASTM D-1623||40.1 psi|
|Shear Strength||ASTM C-273||23.9 psi|
|Elongation at Break||No Data||No Data|
|Water Vapor Transmission||ASTM E-96||3|
|Max Service Temperature of Foam||-||240°F|
|Shelf Life||18 months when stored upright|
|Yield||200 board ft, 16 cu ft|
|Kit Includes||Iso (A) cylinder, |
Polyol (B) cylinder,
six cone white spray nozzles (187918),
four GG white spray nozzles (187915),
9-ft Gun/Hose assembly (GHA),
petroleum jelly packet.