RAINTEK UNIVERSAL KICKOUT FLASHING
Our exclusive VORTEX RELIEF™ gently swirls water runoff into the gutter and away from the wall surface.
Arrow illustrate water flow. If you are water flowing down the roof, do you want it to kickout left or right? Picture below shows a left kickout.
Perfect 6" x 6" x 12" Size
Saves Time and Money
Eliminates Field Fabrication Errors
Cures Galvanic Concerns
A Flexible Kickout Flashing for Retrofits
Installs in Just Seconds
Handles All Temperature Extremes
Meets Builders and EIMA Kickout Flashing Spec's
Failure to install kick-out flashing water diverters at ends of roof flashing terminating in the EIFS wall can cause EIFS wall failure.
- Finest Quality, High-Molecular-Weight Polyethylene with UV Inhibitors
Let Raintek Design, Engineering, and Quality Molded Roof Kickout Flashings solve your ROOF-TO-WALL moisture problems.
Roof and Wall Intersection Flashing
Flashing should extend up behind EIFS system. A diverter kickout flashing should be used where ever a water shed terminates into a vertical wall
The EIFS system should be terminated above the roof line to facilitate roof repairs and treatment of EIFS termination. In addition, the clearance allows for free-flow of water and minimizes accumulation of debris. Set the diverter kickout flashing in a full bed of roof cement between the roof cement between the roof sheathing and underlayment.
Maintenance of the EIFS lamina and sealants at penetrations or terminations is critical to the performance of the water resistive characteristics of the EIFS. Holes and cracks should be repaired as soon as possible. Repair methods for holes and cracks in EIFS are simple and the manufacturers publish recommended methods. Maintenance of joints sealants is the same as that for other types of wall claddings, except that care must be taken to prevent damaging the EIFS when existing sealants are removed.
Successfully added for to the shopping cart.