• Required by Most Window Manufacturers
to Validate Their Warranty
• Meets ASTM E2112
• Exceeds International Residential Code (IRC)
& International Building Code (IBC)
— 2006 IRC, Paragraph R703.8 Flashing & IBC 1405.3
• Patented (Patent#7059087)

Window and Door Flashing that Simply and Effectively Protects Against Water Intrusion

IRC R703.8. & IBC 1405.3 Flashing (Approved corrosion-resistant flashing shall be applied shingle-fashion in such a manner to prevent entry of water into the wall cavity or penetration of water to the building structural framing components.) 1.Exterior window and door openings. Flashing at exterior window and door openings shall extend to the surface of the exterior wall finish or to the water-resistive barrier for subsequent drainage.

 

		4" Window and Door Corner Sill Pan Flashing with Back-Rib That Slopes Outward. Used With Vinyl Windows and Narrow Aluminum Doors. Can Adjust to Any Width.
		4 9/16” Window and Door Corner Sill Pan Flashing with 1/2” Back-Dam. Used Under Doors and True Style Double Hung Windows. Adjustable to Any Width.
		6 9/16” Window and Door Corner Sill Pan Flashing with Back-rib and Removeable 1/2” Back-Dam. Use With Any Door, or Wood, Vinyl & Aluminum Clad and Vinyl Windows.
		Double Buck (Set-In) Window and Door Corner Sill Pan Flashing. Ideal With Block or Concrete Walls and Insert Step Framing Members.

Waterproof Sealing Tape . Printed, 2 mil dead-soft aluminum foil backing with 15 mil butyl rubber mastic adhesive. UL723 - Tested in accordance with UL723

 

— Other Weather Out Flashings —

All of these flashing products are manufactured by Weather Out Flashing and are manufactured to their exacting high quality standards.