PB Washer Specifications |
 |
- Diameter: 2"
- Material: Polypropylene
|
|
Use:
Attaching EPS for Polymer-Based EIFS Systems.
Features:
Excellent impact resistance, service in temperature extremes, finger
closures protect fastener from pop-ups and bleed-throughs. Key lock
face. The 2" diameter increases windload resistance and has 25%
more pullover value than 1-3/4" washers.
Fastener
Pull-Through Results
In Average Pounds Ultimate
 |
|
Insulation
Pull-Over Results
In Average Pounds Ultimate, 1-lb Density
EPS
|
Tapcon
|
Dec-King
|
S-12
|
|
1"
|
1-1/2"
|
2"
|
| 401 |
410 |
427 |
|
85.6 |
93.6 |
108 |
The values listed for the PB and PBH Washers
are ultimate averages achieved under independent laboratory conditions.
Appropriate safety factors should be applied to these values for design
purposes. Test data available upon request. |
