FOAM-LOK™ SPRAY ADHESIVE, 17.25 oz
Foam Lok spray foam adhesive permanently bonds Styrofoam and other polystyrene materials in 4 minutes or less. Use this foam spray adhesive to bond polystyrene (EPS & XPS) foam to other materials. Foam Lok Adhesive is both pressure sensitive and water resistant.
- Foam Lok Adhesive Adheres EPS to EPS
- Fast Setup Time of 4 Minutes
- Use Anywhere
- Clear-Colored Foam Adhesive
- Covers Approximately 100 s.f. per Can
- Does Not Degrade the EPS
- Excellent for Construction, Signs, Theater, Arts & Crafts, Packaging, Florists, and 100's more uses
* Chemicals are prohibited on all domestic and international air shipments.
The solvent base of Foam Lok Adhesive takes only about a 4 minute* wait after spraying the surface to be bonded before locking action begins. Foam Lok Adhesive does not degrade the foam and works great with foam to foam, wood, metal, fabric, and many other surfaces.
Because weather, humidity, and temperature can adversely affect both adhering times as well as bonding strength, we recommend a test be performed prior to use to determine the effectiveness this product will have in your application.
Foam-Lok does not degrade the foam. Foam-Lok is a powerful, fast-setting* EPS adhesive formulation used for bonding EPS to EPS. It also works well for adhering EPS to wood, metal, glass, fabric, and countless other substrates. Foam-Lok is available in a convenient 17.25-oz. spray can or a handy, 30 or 38 pound bulk tank sprayer or a 5 gallon brushable container. Foam-Lok dispenses a web-like pattern, delivery about 100 sq. feet per 17.25-oz. can or 3,500 sq. feet from the bulk sprayer. The 5 gallon brushable should cover 1605 sq. feet at a 5 mil thickness.
The solvent base takes only a 4-1/2 minutes* wait after spraying the surface to be bonded before locking action begins. The water based may take for 5-20 minutes* depending on weather conditions. Foam-Lok does not degrade the foam and works great with foam to foam, wood, metal, fabric, and many other surfaces.
* Because weather, humidity, and temperature can adversely affect both adhering times as well as bonding strength, we recommend a test be performed prior to use to determine the effectiveness this product will have in your application.
Material Safety Data Sheets & Product Info Files
info flas.pdf146 k
No merchandise can be returned without an authorization number. We do not accept returns on chemicals or coatings. Returns must be made within 15 days of invoice and must be in new condition. Materials returned must be shipped prepaid. Discontinued items, custom orders or items that have been out of our factory for 3 months or longer cannot be returned. Returns subject to minimum 15% restocking fee.
All of our products carry an unconditional 6-month guarantee, but Demand must be notified within 48 hours of receipt of defective or damaged merchandise or shortages. Defective products will either be replaced or repaired at no charge. Abused tools will be repaired and returned only if the customer consents to charges in writing.
Please Note - Disclaimer
The products in this catalog are offered as options for the purchaser. Having no control over the use of the products in this catalog, we assume no liabilities connected with their use. Under no circumstances are we or the seller liable for any loss, damage or expense of any kind arising out of the use or inability to use our products.
- add to cart
- add to cart