| Your cart: 0 items. $0.00 |
FOAM CUTTERS |
 |
 |
|||||
|
|||||||
|
|||||||
THE HOT KNIFE SYSTEMThe Original Hot Knife Foam-Cutting Tool !
|
|
|
| The most popular, 4-1/2-inch-capacity Hot Knife foam-cutting tool in the world! We've packed a whopping 105 watts of power right in the handle, making this the most compact, strongest tool in its class. We've added even more value to the Hot Knife with the development of both the GJA3G and GJA4G groove base sleds. This broadens the range to incorporate the use of 26 additional Groove Jet blade options. See Groove Jet Blades and Inserts for GJA3G and GJA4G blade options. |
| This is limited-time-use
tool. To avoid overheating and damaging the tool, depress the trigger for 15 seconds, then release the trigger for 15 seconds. Continue this cycle for a maximum of 5 minutes. Then let the tool rest for 2-1/2 minutes. Using the tool longer than 5 minutes at a time will cause heat damage and is not covered by the warranty. Do not use a screwdriver to tighten the blade screws. Finger-tighten only! |
| ITEM # | |
|
| HKT | Hot Knife Tool, 105 watts | $ 145.00 |
| HKT300 | Hot Knife Tool with 3" Blade | 171.95 |
| HKT450 | Hot Knife Tool with 4-1/2" Blade | 173.85 |
| HKTT | Hot Knife Trade-In | 99.00 |
| 300 | 3" Straight Blade | 36.00 |
| 450 | 4-1/2" Straight Blade | 38.00 |
| G50 | 1/2" Curve Blade | 44.00 |
| G75 | 3/4" Curve Blade | 44.00 |
| G100 | 1" Curve Blade | 44.00 |
| G75SP | 3/4" Curve Blade with Lip | 55.00 |
| SPV | 3/4" V Groove with Lip | 55.00 |
| SPSQ | 3/4" Square Groove with Lip | 55.00 |
| STOP S | Short Ceramic Stop | 10.00 |
| STOP L | Long Ceramic Stop | 10.00 |
| CASEH | Hot Knife Case | 25.00 |
| CASEA | Hot Knife Aluminum Case | 55.00 |
| KITHBLD | 8 Blades and 2 Stops | 371.50 |
| |
||
| HKT20 | Hot Knife Tool, 220 volts | 160.00 |
|
||
| |
HKT, Hot Knife Tool, 105 watts -- $145.00 Blades Sold Separately |
|
| HKT300, Hot Knife Tool with 3" Blade -- $171.95 | ||
| HKT450, Hot Knife Tool with 4-1/2" Blade -- $173.85 | ||
| |
HKTT, Hot Knife Trade-In -- $99.00 Send in old unit then receive new unit at a discount. Blades Sold Separately |
|
| |
International Tool (not usable in United States) |
|
| |
HKT20, Hot Knife Tool, 220 volts -- $160.00 Blades Sold Separately |
|
| |
See Hot Knife Blades |
|
| |
NWFW, Flat Ni-Chrome Wire, per
foot -- $10.00 WCP, Wire Crimping Tool -- $18.00 |
|
||||||
|
1055 Nine North Drive, Alpharetta, GA 30004 USA
TOLL FREE: 1.800.325.7540
TEL: 770.772.7448 FAX: 1.888.534.8383
Contact Form