| Your cart: 0 items. $0.00 |
EIFS and STUCCO |
 |
 |
|||||
|
|||||||
|
|||||||
|
|
MASONRY SCREWS
|
| BUY | Item # | Length | Qty/ Box |
LIST |
| MS1 | 3/16" x 1-3/4" | 1,000 | 89.25 | |
| MS2 | 3/16" x 2-1/4" | 1,000 | 104.00 | |
| MS3 | 3/16" x 2-3/4" | 1,000 | 107.00 | |
| MS4 | 3/16" x 3-1/4" | 1,000 | 141.00 | |
| MS5 | 3/16" x 4" | 1,000 | 195.75 | |
| MS6 | 3/16" x 5" | 1,000 | 448.25 | |
| 10 Free MDB55 Drill Bits per box of 1,000 Screws | ||||
SOLID CONCRETEFastener Pullout Performance Data
|
||||
| Depth of Embedment in Solid Material (inches) | ||||
| |
1" | 1-1/4" | 1-1/2" | 1-3/4" |
| 3/16" | 341 | 581 | 863 | 1059 |
| Test #CH3932 Pittsburgh Testing Laboratories | ||||
| Coating:
Climaseal for masonry/concrete fasteners only. Corrosion Resistance: Kestemich Results (Din 50018, 2.0L) 30 Cycles, 10% or less red rust. Salt Spray Results (ASTM B117) 720 hours, 10% or less red rust. |
||||
HOLLOW BLOCKFastener Pullout Performance Data
|
||||
| Depth of Embedment in Solid Material (inches) | ||||
| |
1" | 1-1/4" | 1-1/2" | 1-3/4" |
| 3/16" | *209 | *357 | *468 | *547 |
| Test #CH3748 Pittsburgh Testing Laboratories | ||||
| Coating:
Climaseal for masonry/concrete fasteners only. Corrosion Resistance: Kestemich Results (Din 50018, 2.0L) 30 Cycles, 10% or less red rust. Salt Spray Results (ASTM B117) 720 hours, 10% or less red rust. |
||||
| *Note 1: Masonry must be pre-drilled 1/2" deeper than fastener penetration. *Note 2: Hardness of masonry varies, and the standard drill bit may not always drill the adequate hole. Please consult Demand Products for assistance in proper drill bit diameter. Please Note: The pullout values listed are the ultimate averages achieved under laboratory conditions. An appropriate safety margin factor should be applied to these values to achieve a design value. |
|
||||||
|
1055 Nine North Drive, Alpharetta, GA 30004 USA
TOLL FREE: 1.800.325.7540
TEL: 770.772.7448 FAX: 1.888.534.8383
Contact Form