Max-Pak Vertical Foam Waste Baler
MAX-PAK VERTICAL FIBER, CARPET REBOND FOAM, PLASTIC FILM & PET PLASTIC WASTE BALER
Since 1976, MAX-PAK has been building some of the industry's most durable and efficient balers. Machines are designed with heavy-duty frames that resist the bowing in doors and walls that are common on competitive models while high-quality hydraulic and electrical components ensure that the units will operate for long periods of time with little maintenance. Furthermore, every MAX-PAK baler is engineered to meet or exceed applicable safety standards.
We’ve engineered our foam baler specifically for the unique challenges of foam. Our passive spring-loaded dawg retention system eliminates spring back, and eliminates the need for an auxiliary hydraulic system common with other foam balers. When foam fights back it can send a shock through the hydraulic system, but our dampened system cushions the hydraulics, which prevents leaks and reduces maintenance costs. Our wide mouth feed openings eliminate the need for shredders when foam goes into our balers, and our unique design provides superior bale escapement when you’re done.
Other companies modify cardboard and plastic balers to accommodate foam and fiber, but we’ve learned that foam is a different beast altogether. What works on cardboard or plastic just won’t handle foam – from feed openings, to hydraulic systems, to material retention and bale escapment. So we took a different approach, and designed a baler specifically made to tame the beast.
- Model designed specifically for foam or fiber
- Model DP06F will also bale carpet salvage and shredded ONP
- Bale size 30" x 48" x 60"
- Bale weight 750 lbs. for foam, and up to 1200 lbs. for shredded ONP
- Packing force 73,502 lbs. at 2600 psi
- 3 - 6" retainer dogs front and back
- Sharks teeth
- Counter balanced easy-to-open feed door
- Soft shift, low shock hydraulic circuit
- Dual chain semi-automatic bale ejection system
Approx. Shipping Weight: 5,000 lbs.
Oil Capacity: 23 Gallons
Platen Pressure: 45.26 PSI
Ram Pressure: 73,502 lbs.
System Pressure: 2,600 PSI
Cylinder: 6” Bore, 3.5” Rod, 52” Stroke
Pump: 12.5 GPM
Bale Size: 30 x 48 x 60
Bale Weight lbs.: Up to 750 foam
Cycle Time - No Load: 52 Seconds
Motor: 15hp, 208/230/46, 0v3ph
Material Safety Data Sheets & Product Info Files
Manufacturer warrants all baler equipment to be free from defects in material and workmanship, under normal use and service as indicated by the owner’s manual and manufacturer’s specification sheets.
All warranty periods begin on the date of manufacture.
All Standard Vertical DP60F Foam Balers carry a limited warranty of one-year.
The warranty period is with the following exceptions/limitations:
- Any single-phase motor will be limited to a 90-day warranty.
- Any Baler used outside the Continental United States will have a warranty of one-year parts only.
All Horizontal Balers carry a limited warranty of one-year parts and labor.
This warranty shall be limited to the factory authorized repair or replacement of defective parts as stated above. Repair or replacement shall be at the discretion of the manufacturer. The purchaser hereby expressly waives all other damage and claims, statutory or otherwise.
This warranty shall not apply:
If the equipment has been operated in excess of factory recommended specifications and hydraulic pressures.
For processing of material not recommended for introduction into baler.
If failure is due to external electrical service, external conditions or operator error.
If failure or damage occurs through lack of or improper maintenance, accident, improper
installation, unauthorized modification, acts of nature, or other causes beyond the control of the
To “wear and tear” consistent with normal machine use.
To any and all electrical components on machines where a phase converter of any type is utilized.
To conveyor belting.
This limited warranty does not cover lost time or contract shortfall due to equipment in operation, whatever the problem.
Modifications of any kind made to the equipment without the express written consent of the manufacturer voids the warranty.
The customer must call and get an approved Service Work Order for any service work to be done.
No warranty repair will be paid without an approved Service Work Order number on all paper work. If a part has failed during the warranty period, the customer must return the defective part within 15 days for testing. If determined the part to be in good working condition or we do not receive the defective part within the given period, the customer will be invoiced for the new replacement part.
Items not covered by warranty:
- Wear Materials.
- Electrical power source to the equipment.
- Damage caused by improper operation.
- Limit Switch Adjustment.
- Eject Chains or Retaining Dogs
- Oil leaks where tightening of Fixtures are indicated.
- Conveyor Belts
|DP06F||Max-Pak Vertical Foam Waste Baler Call for Pricing||1.800.325.7540|