Poly Spray 1 Foam Spray Hard Coat
POLY-SPRAY™ POLYURETHANE SPRAY FOAM HARD COAT SYSTEM
A Polyurethane Hard-Coat Foam Coatings Spray System for the Small User!
Poly Spray is used for theme design, 3d prop fabrication making movie set environments, hard coating precast molds, making surfaces water resistant and other industrial applications. Cured Poly Spray plastic is lightweight, flame, impact, and water resistant. Poly Spray Polyurethane Plastic is a flame rated (E-84). Poly Spray polyurethane plastic is formulated to economically coat a variety of surfaces. The cartridges are dispensed with our Poly Spray Gun, PSG, spray system. Poly Spray cures in about 2 seconds and can be applied to vertical surfaces without running off. An advantage of the system is that large areas can be covered in a short period of time. It can be sanded for priming and painting. Poly Spray plastic can also be sprayed into a rubber mold to make fast, impact resistant castings (application of a release agent may be necessary before spraying into the mold).
Environmentally Safe Foam Hard Coat
Contains No VOC's
One Poly Spray Hard Coat 1500 ml Dual 750 ml Cartridge Set Covers 21 sq. ft. @ 30 mils
Polyurethane Hard Coating Is Paintable (can use primer)
100% Solids, Two-component Aromatic Polyurethane
Dries in 7 Minutes at 70 Degrees
Color Is Neutral
Foam Hard Coat May Be Painted after 7 Minutes
Material Safety Data Sheets & Product Info Files
No merchandise can be returned without an authorization number. We do not accept returns on chemicals or coatings. Returns must be made within 15 days of invoice and must be in new condition. Materials returned must be shipped prepaid. Discontinued items, custom orders or items that have been out of our factory for 3 months or longer cannot be returned. Returns subject to minimum 15% restocking fee.
All of our products carry an unconditional 6-month guarantee, but Demand must be notified within 48 hours of receipt of defective or damaged merchandise or shortages. Defective products will either be replaced or repaired at no charge. Abused tools will be repaired and returned only if the customer consents to charges in writing.
Please Note - Disclaimer
The products in this catalog are offered as options for the purchaser. Having no control over the use of the products in this catalog, we assume no liabilities connected with their use. Under no circumstances are we or the seller liable for any loss, damage or expense of any kind arising out of the use or inability to use our products.
|PS75||1 - 1500ml Cartridge Poly Foam Hard Coat||$75.00 Add to Cart|
|KITPS75||Case of 6, PS75 Poly Foam Hard Coat||$395.00 Add to Cart|
|PSG||Poly Spray Gun Only||$750.00 Add to Cart|