Elasta Shield Flexible Foam Coat
ELASTA-SHIELD ELASTOMERIC FOAM COAT
Is your coating melting your foam? Use Elasta-Shield Foam Protectant prior to application. No more worries.
Elasta-shield Smooth, Vinyl-Acrylic Protective Skin, Flexible Foam Coating for Architecture, Theater, Entertainment Sculpture, Arts & Crafts
Dries clear. Water-soluble, flexible shield protects EPS foam for general handling. Will act as an adhesive for applying fabrics if they are applied while Elasta-Shield is wet. Can be brushed, rolled, or sprayed. Covers 320 sq. ft. at 5 mils.
Elasta-Shield provides a flexible adhesive bond between many scenic materials, such as fabrics, plastics, foams and wood. Elasta-Shield dries to a clear, hard, yet pliable coating that does not suffer from the "tackiness" common in many other flexible glues even after those glues have had days to dry. And unlike ordinary "white" glues which can crack and break when flexed, the adhesive bond of Elasta-Shield remains extremely pliable and strong even as the materials bend and deform. Elasta-Shield is water based, and very safe to use, with little fume and low toxicity.
SUGGESTED USE: Use Elasta-Shield to adhere fabrics to fabrics, fabrics to wood, foam to wood or fabric and many other combinations of materials common in scene shops. Elasta-Shield provides an excellent coating over Ethafoam™ that allows this notoriously difficult foam to be painted with ease. With its super adhesion, Elasta-Shield can be used to laminate blocks of foam together. It can be thinned with water, tinted with universal, or used as an additive to give other coatings like plaster or clay added flexibility.
APPLICATION: Apply by brush, roller, or spray gun.
SURFACE PREPARATION: Surfaces should be clean, dry and free of dirt and dust. When applying Elasta-Shield to vinyls or plastics, clean your surface with denatured alcohol to remove any excess plasticiser that might interfere with proper bonding.
COMPATIBILITY: Elasta-Shield is compatible with all water based coatings and is easily painted or tinted. TintElasta-Shield using, Universal Tints, or simple latex paint. Add Elasta-Shield to other water based coatings as an additive to increase flexibility and adhesion.
MIXING: Stir before using. Do not shake as bubbles may develop.
DILUTION: Use Elasta-Shield undiluted on most non-porous and porous surfaces. Elasta-Shield may be diluted with water if desired. Thinner mixtures will flow and level more than an undiluted application and will dry to a thinner coating.
COLOR: Clear, matte finish.
COVERAGE: Approximately 250 sq. ft. per gallon
FILM THICKNESS: Undiluted 1 mil dry film.
DRY TIME: Varies with application. Sets in 30-45 minutes. Hard in 1-2 hours. Full cure within 7 days.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
Material Safety Data Sheets & Product Info Files
No merchandise can be returned without an authorization number. We do not accept returns on chemicals or coatings. Returns must be made within 15 days of invoice and must be in new condition. Materials returned must be shipped prepaid. Discontinued items, custom orders or items that have been out of our factory for 3 months or longer cannot be returned. Returns subject to minimum 15% restocking fee.
All of our products carry an unconditional 6-month guarantee, but Demand must be notified within 48 hours of receipt of defective or damaged merchandise or shortages. Defective products will either be replaced or repaired at no charge. Abused tools will be repaired and returned only if the customer consents to charges in writing.
Please Note - Disclaimer
The products in this catalog are offered as options for the purchaser. Having no control over the use of the products in this catalog, we assume no liabilities connected with their use. Under no circumstances are we or the seller liable for any loss, damage or expense of any kind arising out of the use or inability to use our products.