Spray Foam Insulation Carbide Planer
CARBIDE POLYURETHANE PLANER-2
Specialized Spray Foam Scarfing Cutters for up to 10 lb Spray Foam Insulation
Heavy-Duty Commercial Quality Planer
16" model Weighs Just 13.2 Pounds
24" model Weighs Just 17.5 Pounds
Replacement Blades Available
Rugged Air Motor
Fafnir Ball Bearings on Cutter Shafts
Air Motors Require 23CFM @ 125 PSI
The pneumatic spray foam scarfing planer motor operates most efficiently when air pressure is maintained at 125psi. An air compressor able to deliver 23.0cfm is necessary. Incoming air should be dry, clean, and filtered. We recommend using a ¾” line from the compressor, the last 20’ use a ½” airline. Lubricate the tool at least once every 8 hours by pouring a small quantity of air motor oil through the air inlet.
Although every effort has been made to make the spray foam scarfing planer as safe as possible, it is the responsibility of the user to wear appropriate safety gear. Full face respirator and eye protection is a must. As with any power tool, use common sense when operating. Do not wear loose clothing or jewelry that could become caught by moving parts, causing injury.
The 16” spray foam scarfing planer model weigh 13.20 pounds and the 24” spray foam planer model weighs 17.55 pounds.