Details

F600 ABS PLASTIC EIFS FINISH  FLOAT

• 5 x 12"

• ABS Plastic Float Plate

The F600 EIFS Float is the Star of our

Call for More Information
1-800-325-7540

Tech Specs

EIFS Finish Float Application:

1.   Apply by EIFS finish coat by mechanical sprayer or traditional hawk and stainless steel trowel.  Do not apply by roller or brush. Maintain a minimum thickness equal to the size of the largest aggregate. When possible, apply Acrylic EIFS Stucco finish to shaded wall surfaces to eliminate unsightly cold joints, apply continuously on each wall section without stopping.

2.  The traditional EIFS sand float texture can be achieved with Medium and Coarse textures by floating the surface in a random  motion with a hard-faced plastic or molded rubber sponge float. To achieve the traditional look from the two Swirl textures, float the surface in a random motion with a hard-faced plastic float immediately after applying the coating.

3.  For heavy textures, select the Medium, Coarse, Swirl Fine or Swirl

Coarse texture. Allow the first coat to set up slightly before texturing.

4.   When applying EIFS Fine textures, we recommend a two-coat application. The first coat should be dry to the touch before applying the second coat. Immediately after applying the second coat, float the finish surface in a random motion with a hard-faced plastic float.

Cautions and Limitations:

The above  instructions are but a suggestive guide, please always contact your coating manufacture or local coating supplier for floating requirements.

Warranty Info

Return Policy
No merchandise can be returned without an authorization number. We do not accept returns on chemicals or coatings. Returns must be made within 15 days of invoice and must be in new condition. Materials returned must be shipped prepaid. Discontinued items, custom orders or items that have been out of our factory for 3 months or longer cannot be returned. Returns subject to minimum 15% restocking fee.

Warranty
All of our products carry an unconditional 6-month guarantee, but Demand must be notified within 48 hours of receipt of defective or damaged merchandise or shortages. Defective products will either be replaced or repaired at no charge. Abused tools will be repaired and returned only if the customer consents to charges in writing.

Please Note - Disclaimer
The products in this catalog are offered as options for the purchaser. Having no control over the use of the products in this catalog, we assume no liabilities connected with their use. Under no circumstances are we or the seller liable for any loss, damage or expense of any kind arising out of the use or inability to use our products.